High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
>>> Main Properties
| ITEM | UNIT | VALUE |
| Alumina Content | % | > 99 |
| Density | g/cm³ | 3.88 |
| Color | - | ivory |
| Mohs Hardness | - | 9 |
| Water Absorption | % | 0.01 |
| Flexural Strength at 25 °C | Mpa | 350 |
| Leakage Rate at 20 °C | Torr/L. sec | < 10 -11 |
Coefficient of Linear Thermal
Expansion at 20 - 1000 °C | mm. 10 -6 / °C.m | 8.2 |
| Thermal Conductivity | W/m.K | 25 |
| Max. Using Temperature | °C | 1800 |
| Breakdown Voltage | KV/mm | 20 |
| DC Volume Resistivity at 20 °C | Ohm/cm | 10 14 |
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.
Product Description
Precision Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries.High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs.High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod,Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers
High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
Precision Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.
High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod
| General Characteristics of Materials: |
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
| Product Name | High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod |
| Material | Alumina Ceramic or zirconia ceramic |
| Color | white or black or customed |
| Standard | according the request of customer |
| Grade | first class |
| Brade | Rock |
| Thread | coarse, fine |
| Used | High Temperature Refractory Ceramic Shaft High Temperature Stirring Rod |
Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
